Radon in your New Hampshire home
Radon is an odorless, colorless radioactive gas which is formed by the breakdown of uranium.
Radon can be found in high concentrations in soils and rocks containing granite, shale, phosphate and uranium, or occasionally industrial waste, in almost any area of the country. Research has shown that once trapped inside a closed structure, Radon can accumulate to the point where a potential health hazard may exist. Actually it is the breakdown of Radon into what is referred to as Radon decay products (or Radon daughters) that represents the greatest concern.
How do Radon Decay Products affect the health of my family?
Radon naturally breaks down to form decay products (Radon daughters) which cling to particles in the air. As you breathe, these particles enter your lungs, emitting bursts of radiation which can damage lung tissue.
Exposure to elevated levels of Radon for extended periods of time can increase the risk of developing lung cancer. Presumed to be the second greatest cause of lung cancer, Radon is estimated to contribute to up to 20,000 deaths per year, according to the U.S. Environmental Protection Agency (EPA).
How does Radon enter my home?
Radon can move into your basement through cracks and pores in concrete walls and floors, dirt floors, floor drains and joints. Radon can also seep into the water of private wells, entering the home whenever water is used.
How do I know if I have elevated levels of Radon in my home?
Since Radon and its decay products are colorless and odorless there is only one way to be sure, and that is to test. Because there are many factors in whether you have elevated levels of Radon in your home, you cannot assume that your home is all right if your neighbors home tested with low levels of Radon.
Who should I use to test?
Always use a firm that has been shown to be proficient by the EPA RMP program. All technicians working for EPA listed testing companies now carry an I.D. card indicating the person has had sufficient training to pass a difficult test regarding Radon and Radon testing and has obtained listed status as a USEPA listed technician. Make sure the person testing your home has this type of card.
Always use a firm that specializes in Radon testing and does not do Radon mitigation. This is an obvious conflict of interest.
What types of tests are available?
There are four generally acceptable methods of testing for Radon including:
- Charcoal Absorption DetectorThese devices contain a quantity of activated charcoal that absorbs Radon during a 2 – 4 day sampling period. The major disadvantages are lack of location placement security and the short monitoring span. Because these devices are not integrating devices, the result may not reflect the true average for the sample period and further testing may be required. The EPA now requires EPA RMP on site testing firms to place two of these devices in the same area either sequentially or concurrently. Results from these devices can vary widely depending upon whether EPA protocols were followed in the handling of the device and the quality control of the manufacturer. (See American Journal of Public Health, August, 1990 issue.)
- On Site Air MonitorsBecause of their precision, these devices can be made relatively tamper free and are the best course of action when large amounts of money are involved, such as a real estate transaction. A Radon specialist utilizes a computer and a device called a continuous working level monitor to measure Radon decay products. Results are available immediately at the conclusion of the test. There are firms that use continuous Radon monitors. These monitors do not measure Radon decay products, the true health concern. Be sure that the monitor being used integrates or reads minimally every hour. This will allow you to see any dramatic changes that occurred during the test such as a window being opened.
- Radon in WaterMany people do not know that Radon coming from deep wells can be a health problem because of aeration or ingestion. Mitigation or removal of Radon in water can be very costly. A standard water portability test usually does not include Radon, therefore, a Radon in water test should be ordered separately if there is a concern.
- Alpha Track DetectorThis type of device is used for long term testing of Radon (3 months to 1 year). They can sometimes be used in a real estate transaction, if the result of one or more short term screening tests are inconclusive.